The concept of glass yarn and construction methods

Special specifications and hardness can be customized according to customer requirements. Uses of fiberglass self-adhesive tapes: Repair dryboard walls, gypsum board joints, cracks in various walls and other wall damage. Main properties of fiberglass self-adhesive tapes: excellent alkali resistance, durability: high tensile strength and Resistance to deformation and cracking: no deterioration, no foaming: excellent self-adhesiveness, no need for pre-priming, quick to use, and easy to construct. Specifications: 8×8.9×9 Fiber Glass/inch: 55-85 g/m2. Width: 25-1000 mm: Length: 10-153 meters. Color: Usually white.

1. Keep the wall clean and dry.
2. Put tape on the crack and press it tightly.
3. Confirm that the gap has been covered with tape, then use a knife to cut off the excess tape, and finally apply mortar.
4. Let it dry naturally, then sand lightly.
5. Fill in enough paint to make the surface smooth.
6. Cut off the leaked tape. Then, note that all cracks have been properly repaired, and use a fine composite material to modify the surrounding areas to make them smooth and new. 3Alkali-resistant product glass yarn is based on medium-alkali or alkali-free Glass Fiber woven fabric and treated with alkali-resistant coating. This product has high strength and good alkali resistance. It plays an important structural role in the insulation system and mainly prevents cracks. Due to its excellent resistance to acid, alkali and other chemical substances and its high longitudinal and latitudinal tensile strength, it can evenly disperse the stress on the exterior wall insulation system and avoid damage to the entire insulation caused by collision and extrusion due to external impact. The deformation of the structure makes the insulation layer have high impact strength and is easy to construct and quality control. It plays the role of "soft steel bar" in the insulation system.