How much do you know about using glass yarn to resist wall cracks?

If you don`t understand the specific role of glass yarn in wall crack resistance, you can just ask in Baidu. There will be many experts coming to give you some advice. However, there are many aspects of knowledge that manufacturers still do not know clearly, so our factory is here to give you a brief introduction!

1. Eradicate the original wall surface, seal the base layer with interface enhancer, then use formaldehyde-free rough leveling, and finally paint it over with a full batch of formaldehyde-free gypsum base to get it done once and for all.
2. It is okay to stick Fiber Glass, but care should be taken when dealing with the base layer. What was painted on the wall before? It is best to remove it completely, then scrape the wall again, then apply glass yarn, and then scrape the final layer.
3. The workers were right. If the cracks in the wall were not patched, they would definitely crack in the future. In the past, there was no patching on the cracks in the wall of my house. It only took a year for the cracks to crack again.
The weather in the south is hot and rainy. The quality requirements for Fiber Glass are moderate hardness, preferably hard. For such a shape, the type of glue chosen must be urine glue, and the baked product has a good hardness, will never be soft, and can have a good heat preservation effect.
Compared with the south, the weather in the north is cooler. Therefore, construction sites have very strict quality requirements for glass yarn, and the type of glue used for its shaping must be latex. Because if you use urine glue, the glass yarn will be hard and will break easily in the colder north. Therefore, you must use latex for baking, so that the glass yarn will be soft and have a good heat preservation effect.