Glass yarn exterior wall cloth refractory fiber pouring construction method

Fiber Glass has many functions, just like bricks can build buildings or be used as weapons. Only by constantly discovering its potential can we make our lives more beautiful and convenient. Next, I will explain to you about glass yarn. The method of pouring and constructing refractory fiber, I hope it can be helpful to everyone:

1. Set up the formwork according to the size required by the design. Lay a layer of plastic film on the inside of the formwork. Pour the mixing material into the formwork. The cloth should be even and do not vibrate with a vibrator.
2. For castables with a density not greater than 0.8g/cm³, use foam to compact them in layers after pouring. For castables with a density not greater than 1.0g/cm³, use special tools to compact and solidify after pouring.
3. Maintenance and mold removal. The ambient temperature should not be less than 20°. The mold can be dismantled after 4 hours of natural curing. The mold can be dismantled after 4 hours of natural curing. The mold can be disassembled after 5-7 hours of natural curing if the ambient temperature is not greater than 20°. If local water chestnut damage occurs after the mold is removed, it can be repaired. , the furnace top mold removal time should be extended as appropriate.
4. The furnace wall is poured in layers, and the height of each layer is 700-1000mm. The furnace roof is constructed in sections. The furnace roof between the two expansion joints should be poured in one go.