When is it necessary to use Fiberglass Cloth?

Fiberglass Cloth is made of fiberglass woven fabric as the base material, which is soaked and coated with polymer anti-emulsion. As a result, it has good alkali resistance, flexibility and high tensile strength in the longitudinal and latitudinal directions, and can be widely used for thermal insulation, waterproofing, crack resistance, etc. of interior and exterior walls of buildings. The Fiberglass Cloth is mainly alkali-resistant Glass Fiber Fiber Glass, which is made of medium-alkali-free glass fiber yarn twisted with a special organizational structure - leno tissue, and then treated with high-temperature heat setting such as alkali resistance and reinforcing agents.

1. Under what circumstances is it necessary to use Fiberglass Cloth?
①On wall reinforcement materials.
② Reinforce cement products.
③Granite, mosaic special Fiber Glass, marble back-Fiber Glass.
④Waterproof membrane cloth and asphalt roof waterproofing.
⑤Reinforced skeleton materials for plastic and rubber products.
⑥ Fireproof board.
⑦Grinding wheel base cloth.
⑧Geogrid for highway pavement.
⑨What are the uses of Fiberglass Cloth such as caulking tape for construction?
2. Under what circumstances do you need to use the performance of Fiberglass Cloth?
① Fiberglass Cloth has relatively high node strength, that is, if the nodes of the Fiberglass Cloth slip when it is subjected to tension, small cracks will appear in the early stage of stress. Therefore, when testing the strength of a node in a timely manner, you need to cut a piece of fiberglass cloth for testing, with a size of 330mm × 50mm. The strips of the Fiberglass Cloth used for testing can only be taken in the weft direction and then removed. Only one weft yarn in the middle is left in the yarn. After 50 mm, cut that one short, and then do a tensile test. Generally, the external wall insulation system requires the node strength of the Fiberglass Cloth to be ≧3.2N/single Root thread.
② Fiberglass Cloth has a small deflection of the weaving wires. It is difficult to avoid the wires running all over when weaving the Fiberglass Cloth. If the Woven Fiberglass Cloth has too obvious deviation, it will lead to eccentricity during stress. , will affect the final use effect, making the Fiberglass Cloth unable to play its role. Generally speaking, within a length of one meter, the number of woven wire deviations cannot exceed 3, otherwise it will be an unqualified Fiberglass Cloth.
③The Fiberglass Cloth has low tensile strain, because if the nodes do not slip when the Fiberglass Cloth is subjected to tension and the tensile strain is too large, it will cause cracking. This also requires the use of certain testing methods. Only after passing the test can it be put into production and put into the market.
3. Under what circumstances is it necessary to use the characteristics of Fiberglass Cloth?
① It has very stable chemical properties. It has alkali resistance, acid resistance, water resistance, and corrosion resistance.
② It is very easy to react with styrene and has strong adhesion to resin.
③The Fiberglass Cloth is very light and has high strength.
④The stability of the Fiberglass Cloth is very good, the outside is smooth, and it is not easy to deform.
⑤ Fiberglass Cloth has strong toughness and strong impact resistance.
⑥Fiberglass Cloth has the property of preventing mildew and can also prevent insect infestation.
⑦Fiberglass Cloth can provide fire insulation, heat preservation, noise isolation, insulation and other properties.