What issues need to be paid attention to during the installation process of glass yarn?

The following points should be paid attention to during the production process of its mortar anti-crack Fiber Glass:

1. The glass yarn material must be put in in batches and cannot be put in all at once;
2. Precautions during the production process of mortar anti-crack Fiber Glass: When adding polypropylene fibers, they must be dispersed in cement first, because the fine particles of cement can eliminate the static electricity of the fibers so that the polypropylene fibers can be dispersed;
3. Stir the glass yarn to mix evenly, but the mixing time should not be too long, 15 minutes is appropriate. Mixing sand and cement for a long time is easy to precipitate and stratify (pay special attention to vertical mixers);
4. glass yarn needs to adjust the amount of additives according to seasonal changes;
5. The glass yarn prevents additives or cement from clumping due to moisture;
6. It is strictly forbidden to mix, stack and use glass yarn with acidic substances;
7. glass yarn is prohibited from being used in construction below 5°C. Low-temperature construction will cause the greatest project quality problems, causing the plastering mortar and the insulation board to not adhere. This is a project quality problem that will not be remedied later.