What are the requirements for Drywall Tape construction?

Fiber Glass is a new type of alkali-resistant product made of alkali-resistant or medium-alkali fiberglass yarn as raw material, woven into Drywall Tape as the base material, and then coated with acrylic copolymer and dried. This product has the characteristics of stable structure, high strength, good alkali resistance, anti-corrosion, anti-cracking and other characteristics. It has the best reinforcement effect and is simple and easy to construct. It is mainly suitable for reinforcing and preventing cracks on the internal and external surfaces of cement, gypsum, walls, buildings and other structures. It is a new building material for exterior wall insulation projects.

Nowadays, building energy-saving exterior wall insulation and plastering are required to prevent cracking. Because the insulation dry mortar has low strength and thickness, it is easy to crack, so it must be covered with Drywall Tape before covering.
Fiber Glass is woven with medium-alkali or alkali-free Glass Fiber yarn and coated with alkali-resistant polymer emulsion. Drywall Tape is a new type of inorganic composite material. Embedded in the wall, it can evenly disperse stresses such as extrusion and impact on the wall, making the insulation layer highly impact-resistant and acting as a "soft steel bar."
1. On the first floor of the building, door and window openings, decorative joints, yin and yang corners, etc., a layer of Drywall Tape should be laid and a layer of anti-crack mortar should be applied.
2. The overlapping length of ordinary Drywall Tape should not be less than that of Drywall Tape. The Drywall Tape is only butted but not overlapped.
3. The width of each side of the grid cloth at the yin and yang corners should not be less than.
4. The Drywall Tape around the door and window openings should be turned out of the wall, and a layer of Drywall Tape should be laid at 45° at the four corners.