Using Profile Pvc can enhance the life of the wall

The cracking of the internal insulation board seam is mainly caused by the deformation of the outer protective wall. When Wall Corner is used, the internal brick wall or concrete wall will be protected. The large temperature change caused by the constant change of outdoor climate occurs in the outer insulation layer, which increases the temperature of the internal main wall in winter.

The temperature is lowered, the temperature change is relatively gentle, and the thermal stress is reduced. Therefore, the risk of cracks, deformation, and damage to the main wall is greatly reduced, and the life span can be greatly extended. Other atmospheric destructive forces such as snow, rain, freezing, melting, dryness, and wetness on the main wall will also be greatly reduced.
Facts have proved that as long as the wall and roof insulation materials are properly selected, the thickness is reasonable, and the construction quality is good, the Profile Pvc can effectively prevent and reduce the temperature deformation of the wall and roof, thereby effectively improving the durability of the main structure. Wall Corner has different choices for different regions and different construction teams. The biggest difference is the degree of hardness, which is controlled by two methods.
The first is the composition of the latex applied on the surface. Generally speaking, urea products are hard, and latex products are soft. This is the difference under normal conditions, the same temperature, and the same product. Of course, the quality of the former is slightly worse than the latter.
The second is the temperature control of the oven during baking. If the temperature is slightly higher, the product will be hard; if the temperature is slightly lower, the product will be soft. This is the easiest to control and requires the highest precision. If the temperature is too high, the fabric will turn yellow, and if the temperature is too low, the baking will be incomplete.