Understand the classifications of glass yarn

The use of grids used in the construction industry is widespread. Let`s take architectural applications as an example to divide them. glass yarn is used for the insulation of exterior walls of buildings, and glass yarn is used for indoor insulation and waterproofing. It is called interior wall insulation glass yarn.

The types of these glass yarn are different, and the scope of use is also different. This requires builders to use different types of glass yarn according to the requirements of different customers. This requirement is very important for our country to save resources and protect the environment.
Knowing the classification of these Fiber Glass, when choosing Fiber Glass, remember to adapt to local conditions and choose the most appropriate one.
As a high-quality thermal insulation material, glass yarn is widely used in exterior wall insulation. If used improperly, cracks and breaks can easily occur. Here are some precautions for exterior wall insulation construction:
The construction of exterior wall insulation engineering is mainly divided into two processes: insulation layer engineering and protective layer engineering. It is usually required that the construction of the protective layer project can only begin after the insulation layer project has been completed and accepted. Below we will briefly describe the precautions during the construction process.
Precautions for the construction of glass yarn insulation layer: The bonding cavity slurry should be prepared according to the manufacturer's mix ratio. During the preparation process, it is necessary to timely and appropriately measure, strictly measure, mechanically stir, and be supervised and managed by a dedicated person.
At the same time, it is necessary to ensure that the cavity slurry is mixed evenly, and the prepared bonding cavity slurry is stored in a cool, sheltered place. If the glue initially sets, it is strictly prohibited to use it; for the polystyrene board insulation layer, it is usually pasted and phased. Combined fixation methods.
The strength between the bonding cavity slurry and the insulation layer is usually the weak link in the polystyrene board external insulation system. The bonding of the polystyrene board can be improved by increasing the bonding area between the bonding mortar and the polystyrene board. Glue adhesive strength.