The glass rod plays a role in fixing and insulating the exterior wall.

The anti-corrosion performance meets the requirements of the specification and can meet the progress requirements. The process is introduced as follows:

1. No seasonal restrictions: The welding construction of the insulation nails is not subject to the temperature control of the construction site. The glass rod will not affect the welding quality when welding in winter and at any temperature.
2. Firm and reliable: Once the welding is completed, the insulation nails will not fall off naturally, thus effectively ensuring the construction quality.
3. Good appearance: Since the length of the welding nails is consistent, the surface of the insulation cotton after welding is flat, clean and beautiful.
In addition: The welding machine can also be used as a repair tool to repair the parts of the bonded insulation nails that fall off due to poor bonding to ensure the quality of the project.
4. Wide range of applications: All places where fixed insulation needs to be installed can be used.
5. No shape restrictions: Welding on ventilation ducts of any shape can ensure the construction quality, especially when constructing on circular ducts, it can better reflect the incomparable superiority.
6. Save materials: Coiled materials can be used, which can save insulation cotton and reduce seams, thereby saving construction costs and improving insulation quality.
7. Save time: The welder can weld up to 40 insulation nails per minute, and it is welded and fixed while laying insulation cotton, without waiting for the solidification time of the insulation nails.
8. Safe and simple construction: Since the one-time installation method of laying and fixing is adopted, the time and number of high-altitude operations of construction personnel are reduced, making the construction safer and faster.
9. Reduce the process: Because it is welding insulation nails, the cleanliness of the ventilation duct surface is not required. Especially in places with relatively harsh construction environments, this process can prevent the insulation nails from falling off.