The construction process sequence of wall treatment glass yarn is as follows

First, apply interface agent to the wall to be constructed, and paste kraft paper or Fiber Glass on cracks. Use an ink fountain to stretch the thread at the inner corner, and use plaster to find the straightness. The outer corner also needs to be vertical with a two-meter ruler hanging a hammer ball, and use plaster to find the straightness. The wall should be inspected with a two-meter ruler. High places can be shoveled down appropriately, and low places can be filled with plaster. After the yin and yang angles are straightened, the error is within 3 mm, and the wall surface is tested with a ruler and the error is within 3 mm. After all the walls are straightened and leveled with gypsum, water-resistant putty is scraped 2-3 times over a large area. Finally, apply latex paint or wallpaper.

What needs to be noted during wall treatment is that the brand and basic model of interface agent, putty, latex paint, etc. must be indicated. Where there are gaps, you must use kraft paper or glass yarn to seal them. For internal insulation walls and cracked walls, they need to be fully clothed. If they are fully clothed, additional fees will be charged. The latex paint must be indicated as being purchased by Party A or Party B. After clarifying the various materials and basic construction techniques, you can know the price of wall treatment.
The construction technology of wall treatment: refers to the construction of house walls under the condition that the civil engineering standards are qualified, that is, the civil engineering standards have been inspected by a two-meter-long aluminum alloy ruler, and the flatness and verticality errors are within 5-8 mm, Yin and Yang The angle of the wall is tested with a corner ruler, and the 90-degree error is within 5-8 mm. The basic treatment of the wall exceeding 5-8 mm will need to be billed separately. Use gypsum to make the wall basically flat, and then apply a full batch of water-resistant putty. Construction when the wall meets civil engineering standards is wall treatment.