Precautions for construction of Glass Mat

Glass Mat is based on medium-alkali and alkali-free Glass Fiber woven fabrics and is treated with alkali resistance. This product has high strength, good adhesion, and conformability. It is widely used for wall reinforcement, interior and exterior wall insulation, and roofing. In terms of waterproofing, it can also be used to enhance cement, asphalt, marble, mosaic and other wall materials. It is a new type of construction engineering material.

It plays an important structural role in the insulation system, mainly preventing the occurrence of cracks. Due to its excellent acid and alkali resistance and high tensile strength, it can evenly disperse the stress received by the external wall insulation system to avoid external forces. The collision and extrusion cause the deformation of the entire insulation structure, so the Glass Mat acts as a "soft steel bar".
After getting the Glass Mat, you can rotate the bucket lid counterclockwise to open the Glass Mat. You need to stir the adhesive inside evenly. If the adhesive inside is in a uniform state, you can stir it, which can effectively avoid sticking. The mixture appears to be separated.
Then put it in a dark place, do not expose it to the sun, and do not expose it to light within an hour. Then pour the cement and sand into the bucket, add some cement-specific water, and seal it with Glass Mat. Then you can cut the Fiber Glass pieces from the Glass Mat according to the required length, leaving the necessary connecting edges and overlapping edges.
Of course, it must be cut in a clean and flat state, and the cutting must be accurate. After the Fiber Glass is cut, it is not allowed to be folded or stepped on, which will affect the quality of the Fiber Glass.