How stable is the Glass Mat?

Fiber Glass is generally made of alkali as raw material, and then processed and applied layer by layer to form a Glass Mat. It is very stable and strong, and it is simple and easy to install during construction. It generally plays the role of heat preservation. Due to its excellent resistance to acid, alkali and other chemical substances and its high longitudinal and latitudinal tensile strength, it can evenly disperse the stress on the exterior wall insulation system and avoid the entire damage caused by collision and extrusion due to external impact. The deformation of the insulation structure makes the insulation layer have high impact strength and is easy to construct and quality control. It plays the role of soft steel bars in the insulation system.

The Fiber Glass has strong stability: the hard foam urethane spray is firmly combined with the base wall, which is the basic prerequisite to ensure the stability of the external insulation layer. For walls, their surfaces should be interface treated. If the surface layer is loose or hollow, it must be carefully cleaned to ensure that the rigid foam polyurethane spray insulation layer is tightly integrated with the wall. The hard-packed Hao Ammonia spray exterior insulation system should be able to withstand the combined effects of the following factors, namely under the local unfavorable temperature and blue conditions. Withstand the force of the wind. Under the combined load of various internal forces such as dead weight and normal collision, the insulation layer still does not separate from the base and falls off, and the egg remains stable in the tidal Z state.
Glass Mat is a high-molecular thermosetting polymer and an excellent thermal insulation material. Its thermal conductivity is 0.015-0.025W (m.K). It provides an excellent material for the development of wall insulation technology and achieves better performance. High energy-saving requirements for walls create conditions. Generally speaking, permanent mechanical anchoring, temporary fixing, through-wall pipes, or the fixing of attachments on exterior walls often cause local thermal bridges, and Glass Mat is used. Spraying process.