General Drywall Tape production process

1. Weave the Glass Fiber into a Drywall Tape and cut it into a suitable size. This step is mainly to ensure that the materials used meet the prescribed standards and quality requirements.

2. Prepare the selected adhesive according to the proportion and soak the Drywall Tape. Be careful not to apply too much glue to avoid corrosion and peeling when exposed to water after construction; at the same time, ensure the uniformity of the application to improve its impact resistance.
3. After the plastering of the wall is basically completed, start pasting the grid cloth. First clean the dust and dirt on the wall. In order to avoid falling off or shifting when pulling, the surface should be kept smooth after the paste is applied.
4. Use nails to firmly press the attached Drywall Tape to the wall. Generally speaking, it needs to be staggered in both horizontal and vertical directions every meter to fix it. After the overall laying is completed, the excess part must be trimmed with a paper knife or trimmed with a grinding wheel (this process must also be remembered. live). Also check whether there are bubbles and other conditions and deal with them in time to complete the production. At the same time, you need to pay attention to safety when making exterior walls! These details cannot be ignored.
5. Just clean the completed wall, and the finished effect is also very good.
6. Quality inspection: Judge product quality by observing whether there are broken threads, skipped yarns and uneven joints. If no moisture comes out when squeezed by hand, it means it is dry. Only after the finished product passes the inspection can it be shipped out of the factory and put into use; this step is very important but is often ignored by people, because once the user uses a faulty product and causes a problem, a series of unnecessary troubles will occur if the user finds the manufacturer to solve the problem, so everyone must not Don't worry, be patient and do every step of the work. The above information is for reference only and the specific operation methods will be adjusted according to the actual situation.