Application and construction methods of Profile Pvc on old walls

Since the opening of the door to science and technology in the new era, our cities are full of tall buildings rising from the ground. Only in the old city or rural areas can we see old houses with a long history. But even old houses need to be lived in, so they are renovated, the original exterior and interior walls are shoveled away, and Pvc Drywal is added. Speaking of this, the editor will stop. Next, I want to know more about the application and construction methods of Profile Pvc on old walls.

To paste the Pvc Drywal, you need to see whether the wall structure has cracks. If not, you don’t need to paste it all. You only need to hang some in the joints or grooves where it is easy to crack. First, the wall base needs to be cleaned, and white latex is applied to the position where the Profile Pvc is required with a roller brush, and it is evenly applied.

Then spread the virgin Pvc Quake Proof bead, cut it to the appropriate size, and spread it flat on the position where the white latex is applied. After the Profile Pvc is pasted, adjust the appropriate position, and then evenly apply a layer of white latex on the pvc Angular again to make it stick firmly. After hanging the virgin Pvc Quake Proof bead on the wall, start plastering.

Generally speaking, pvc Angular is needed for lightweight walls, lightweight partition walls, thermal insulation walls, joints between new and old walls, and after water and electricity grooving. Profile Pvc is used on cement, gypsum and walls to increase strength and prevent cracking.