Analyzing Fiberglass Cloth performance

The Fiberglass Cloth has very good performance during use, so when many users use this product now, they have a lot of recognition and praise for its performance. That is because it has very good crack resistance during the process. Next, we will let the Fiber Glass manufacturer analyze the performance of this product for everyone.

1. lower tensile strain
If the nodes do not slip when the Fiber Glass is stretched, but the stretching strain is large, it will also cause the plastering glue to crack at an early stage. The tensile strain of the Fiberglass Cloth includes the strain in the early stage of tension and the strain at fracture.
2. Higher node strength
If the nodes slip when the Fiberglass Cloth is stretched, the stress in the initial stage will be mostly borne by the plastering glue and cracks will occur. The test method for node strength is: cut a 330mm×50mm test strip along the weft direction (an odd number of weft yarns), and cut all the yarns on both sides about 150mm from the end of the test strip (it needs to be cut in the center of the node). Only one weft yarn in the middle is left; after 50mm (or 6 nodes apart), the Fiberglass Cloth manufacturer cuts the middle weft yarn.
3. Smaller yarn deflection
When Fiber Glass is weaved, it is inevitable that the yarn will go astray. If it deviates too much, it will cause eccentricity when receiving force, which will also affect the use effect.
So Fiberglass Cloth is very widely used. Therefore, in the process of use, it can be more reflected that its superior functions have also been recognized and praised by many users.