About the purpose and use of Fiberglass Cloth

One of the components of the Fiber Glass is where the main structural wall meets the rear wall. Parts like these are basically double-layered plaid fabrics. The detailed operation method is as follows:

1. Plaster the bottom of the part, and then stick a layer of Fiberglass Cloth on the bottom plaster layer.
2. Apply a thin layer of dust on the Fiberglass Cloth.
3. Continue to paste the second layer of Fiberglass Cloth on the plastering layer.
4. One layer of plastering, leveling and trimming. The alkali-resistant fiberglass Fiber Glass is part of the wall plaster. It is also used for plastering large areas on walls. At this time, only a layer of Fiberglass Cloth is attached.
5. It can be used to build new walls. Generally, after the new wall is built, it needs to be cured for about a month before the subsequent wall construction can be continued. If the curing time is not enough, the construction effect of the wall will be affected. , or cause damage to the wall. In order to save the construction period and carry out wall construction in advance, many masters will hang a layer of Fiberglass Cloth on the wall before applying latex paint, and then start painting the latex paint. The Fiberglass Cloth can not only protect the wall, but also It can also prevent wall cracks.
6. It can also be used for wall grooving. Under normal circumstances, where there are wire troughs in the home, it will inevitably cause damage to the wall structure of the home. Over time, it is easy to cause cracks in the wall. If we hang a layer of Fiberglass Cloth on the wall at this time, and then continue the wall construction later, we can minimize the possibility of cracks on the wall in the future.