Several ways to solve wall cracks using Profile Pvc

1. Wall cracks: Cracks are unevenly distributed with the change of foundation.

This is caused by wall settlement and deformation. Solution:

1) If the building is always settling and deforming, do not rush to repair it. It is best to wait until it is no longer deformed before repairing it.

2) Repair should be based on the shape and density of the cracks and adopt multiple plans. You can either add Profile Pvc to repair or add Profile Pvc to repair, putty.

2. Paint layer cracks: The leveling mortar is not flexible enough, which is manifested as relatively large cracks. Normally, it is evenly distributed. Use high-elastic putty or two-component distribution. Use high-elastic putty or two-component elastic putty to fill and repair. Fully apply elastic putty and repair separately.

3. Cracks in the insulation layer: Irregular cracks are common. Irregular cracks are common. It is caused by many reasons such as compression deformation of the benzene board, overlap of the l corner bead, mortar, inaccurate construction, etc. The solution should be based on the size and distribution of the cracks. If it is more serious, it is necessary to add j corner bead or 2 corner bead. If it is not serious, use two-component cloth. If it is not serious, use two-component flexible putty to apply.

4. Cracks in the putty layer: Generally, it is manifested as slight cracks, evenly distributed, and fine cracks, evenly distributed. Note that it is not a seam but a pattern, and there is a difference between the pattern and the seam.