Factors affecting the price of Profile Pvc

Profile Pvc is mainly used for exterior wall insulation, interior wall insulation, etc. The price per square meter varies from a few cents to a few yuan depending on the weight and raw materials.

1. The weight of pvc Corner L is different, and the price is also different, usually ranging from 80 grams to 300 grams per square meter. The price is different for different gram weights.

2. The raw materials of Profile Pvc are different, and the price is also different. The price of pvc Corner L raw materials from high to low is Jin Can yarn, anti-Jin Can yarn, and Tu Can yarn. Because Tu Can yarn is of poor quality, it has been banned by the state, so this kind of plaster Bead is rarely seen on the market. Now the more common one is imitation Jin Can yarn, which is cheaper and has slightly worse tensile strength than Jin Can yarn. Jin Can yarn is also used a lot, usually for some construction sites with high engineering requirements.

For these three types of yarn, we don’t know what raw materials are used to produce the plaster Bead without some test methods. In front of the fair market price, the low price is more likely to represent the quality problem;

3. The Profile Pvc is usually 100 meters per roll and 1 meter wide, but some dealers sell drywall Bead with a difference of 20 meters per roll. When asked about the reason, they said it was a mistake, but what kind of mistake can make a difference of 20 meters? Our manufacturers usually ensure that the error is half a meter.

So to buy a good product, not only to ask the price, but more importantly, pay attention to the details of the quality, grams, materials, meters, don’t be greedy for small profits and suffer big losses.