Do you know the construction steps of Profile Pvc?

Profile Pvc construction is an indispensable part of the building exterior wall insulation system. It can effectively enhance the tensile strength of the wall, prevent the wall from cracking, and improve the overall performance of the insulation system. Below, we will introduce the construction steps of 1 pvc corner in detail to help you better understand and master this technology.

1. Preparation before construction

Before the 1 pvc corner construction, you need to make full preparations. First, clean the construction site to ensure that the wall is flat, dry, free of oil stains, floating dust and other debris. Secondly, check the quality of the insulation material to ensure that it meets the requirements of the specifications and has no damage, deformation and other problems. Finally, prepare the tools and equipment required for construction, such as Profile Pvc, trowel, cutting knife, mixer, etc.

2. Apply the base mortar

Applying the base mortar is the first step in the construction of pvc corner t. First, mix and stir cement, sand and water according to the prescribed ratio to make the base mortar. Then, use a trowel to evenly apply the base mortar on the wall, paying attention to the uniform thickness of the mortar to avoid hollowing, cracking and other problems. After applying, timely maintenance should be carried out to ensure that the strength of the mortar meets the requirements.

3. Laying the Profile Pvc

After the bottom mortar is dry, you can start laying the Profile Pvc. First, cut out the pvc corner t of appropriate size according to the size and shape of the wall. Then, lay the render beads on the wall, paying attention to the flatness and tightness of the Profile Pvc to avoid problems such as loosening and wrinkling. At the same time, ensure that the render beads fits the wall well to avoid problems such as hollowing and falling off. After laying, use a trowel to compact the Profile Pvc to ensure that it is tightly combined with the bottom mortar.

4. Apply the surface mortar

After laying the Profile Pvc, you can start applying the surface mortar. Similarly, mix and stir cement, sand and water according to the prescribed ratio to make the surface mortar. Then, use a trowel to evenly apply the surface mortar on the Profile Pvc, paying attention to the uniform thickness of the mortar to avoid problems such as uneven thickness and cracking. After applying, timely maintenance is required to ensure that the strength of the mortar meets the requirements.