Fiber Glass mesh customization

Fiber Glass mesh is used in home decoration to repair wall cracks or to treat second-hand house walls, especially on old walls.

Old houses or older second-hand houses need to use fiberglass mesh when renovating or decorating them. First, remove the original wall covering and then hang a layer of wall mesh. Mesh cloth must be affixed to the wall before painting the wall with latex paint. This mesh cloth is mainly used to prevent Anti Corrosion and cracking. Because it has been used for a long time and is exposed to wind and sun, it will definitely affect the structure of the wall. , this can reduce the possibility of cracks in old walls to some extent.

When attaching mesh cloth, you need to check whether there are cracks in the wall structure. If not, there is no need to fully attach it. You only need to hang some at the joints or grooved locations where cracks are likely to occur. First, the base layer of the wall needs to be cleaned. Use a roller to apply white latex to the location where the mesh cloth is required, and apply it evenly. Then spread out the mesh cloth, cut it to the appropriate size, and spread it flat on the area where the white latex has been applied. After attaching the alkali-resistant mesh cloth, adjust the appropriate position, and then re-apply a layer of white latex evenly on the mesh cloth so that it can stick firmly. After hanging the net on the wall, start the plastering work.

TECHNICAL DATA

SPECIFICATION

Standing Packing

Supply Capacity