PVC corner guard line corner protection

The profile is made of PVC Plastic powder, used for finishing plasterboard which is mounted at different angles in the range of 0 - 180 degrees. It facilitates finishing works and execution straight edges, prevents from cracking. This profile is useful especially in building attics, where we have to face angles other than 90 degree. Thanks to the fact that the Profile Pvc it is resistant to mechanical deformation.

PVC corner strips can form a straight edge on the edge of the stucco work to resist cracking, and protect and strengthen the most vulnerable parts of the stucco. Its mesh punch hole can be firmly anchored into the plaster on either side of the edge,in the full depth of the stucco.

Because the plaster corners are most susceptible to damage during construction and when the building is completed and used, the use of corner strips strengthens the firmness of the Wall Corner and saves a lot of time because it is easy to construct. Corner strips are quick to operate and easy to construct, strengthen the corner, and are widely practical.

Corner strips have the advantages of Anti Corrosion resistance, impact resistance, anti-aging, good adhesion, and  because punch hole full combination with putty. They greatly enhance the impact resistance of the corner, maintain the long-term beauty of the corner without being damaged, and can be constructed simultaneously with the main project. , there is no need to use a foot board during use, it is easy to operate, and the construction efficiency is 2-5 times that of the general one. It simplifies the construction procedure, speeds up the construction speed, reduces the project cost, and improves the project quality.

Supply Capacity