Architectural decoration T-slot pvc corners

Points to note, construction procedures and techniques for installing and constructing Wall Corner PVC trunking

1. Spring line positioning: According to the water and electricity construction positioning and solidification drawings, determine the starting end to the end position of the line trough, calibrate the direction of the main line and branch line along the drawing, find the horizontal or vertical line, and use a laser level to locate the walls, ceilings, and beams along the line trough. Bounce or draw lines on , boards, columns, etc.; mark the position of fixed points or the positions of supports, hangers, and brackets.

2. Construction of fixed points or production and installation of supports, hangers, and brackets: Profile Pvc trunking is Anti Corrosion. When installed vertically against the wall, plastic expansion tubes or double-sided fixed points should be installed in a "Z" shape according to the marked fixed point positions. The rows should be fixed in parallel; when the wire trough is installed horizontally, the suspenders, brackets and brackets at both ends should be fixed first, and then the supports, hangers and brackets at both ends should be used as the basis to evenly set them using the cable pulling method.

3. Wire trough fixation: When installing PVC wire troughs, the trunk lines should be installed first and then the branch lines. The spacing between the fixing points of the trough or brackets and hangers should be even and standardized.

②. Cable ties should be fixed in the cable trough and the cables should be bound.

Supply Capacity