What should plaster corner bead manufacturers pay attention to when constructing?
August 08, 2024
If you use plaster
corner bead products for fine decoration, you can choose to paste plaster corner bead, but you must use high-quality
Profile Pvc, the Profile pvc size is about 4*4mm, because the smaller the Profile pvc size, the greater the tensile force of the product. If the strength of the wall base cement mortar is low or there is sand falling, you can use strong plaster corner bead to paste the wall to solve it, so that the final decorated wall will be perfect.
plaster corner bead is mainly based on medium alkali or alkali-free Profile pvc as the basic raw material, woven into Profile pvc, coated with acrylic copolymer liquid, and dried to generate a new type of alkali-resistant Profile pvc.
It is mainly used on the outside of cement and gypsum walls of building materials to prevent cracking. The construction time of plaster corner bead is required to be carried out after 24 hours. First, apply a layer of polymer anti-cracking mortar on the insulation layer, and then hang the plaster corner bead, and the area of the anti-cracking mortar should be larger than the area of the Profile pvc. Prevent warping.
During construction, it should be applied from the center to the surrounding area, and try to avoid wrinkles in the plaster corner bead. At the four corners of the doors and windows, after the plaster corner bead is applied, a standard plaster corner bead should be placed on the outer wall to ensure firmness. The anti-cracking surface layer must not be exposed to rain within 4 hours after construction. Therefore, good weather should be chosen for construction.